Technical Specifications
25. Toxic Material
Reduction
2. Flame Retardant Limitation
Halogenated flame retardants are
limited in the following components
to 0.01% (100 ppm) to the extent
allowable by local code:
a. Window and waterproofing
membranes, door and window
frames and siding.
b. Flooring, ceiling tiles and wall
coverings.
c. Piping and electrical cables,
conduits and junction boxes.
d. Sound and thermal insulation.
e. Upholstered furniture and
OPTIMIZATION
The product don't contain halogenated flame
retardants
3. Phthalate (Plasticizers) Limitation
DEHP, DBP, BBP, DINP, DIDP or DNOP
(often found in polyvinyl chloride
[PVC]) are limited in the following
components to 0.01% (100 ppm):
a. Flooring, including resilient and
hard surface flooring and carpet.
b. Wall coverings, window blinds and
shades, shower curtains, furniture
and upholstery.
c. Plumbing pipes and moisture
OPTIMIZATION
In accordance with US Consumer Product
Safety Improvement Act 2008 (CPSIA)
(H.R.4040) Title I, Section 108 & California
Proposition 65 & Annex XV II item 51&52 of the
REACH Regulation (EC) No. 1907/2006 and
amendment No. 552/2009, the product
contains less than 100ppm.
5. Urea-Formaldehyde Restriction
Urea-formaldehyde presence is
limited in the following components
to 100 ppm:
a. Furniture or any composite wood
products.
b. Laminating adhesives and resins.
c. Thermal insulation.
OPTIMIZATION
The product contains urea-formaldehyde less
than 100ppm.
Comfort
74. Exterior Noise Intrusion Part 1. Sound Pressure Level
Each regularly occupied space meets
the following sound pressure level as
mesured when the space and
adjacent spaces are unoccupied, but
within 1 hour of normal business
hours:
a. Average sound pressure level from
outside noise intrusion does not
PRECONDITION
1. The product has IIC = 66 according to the
standard ASTM E492-09
2. The product has STC = 68 according to the
standard ASTM E90-09
79. Internally Generated
Noise
Part 1. Sound Masking Limits
If sound masking systems are used,
sound levels fall within the following
range, when measured from the
nearest
workspace:
a. Open workspaces: 45 - 48 dBA.
b. Enclosed offices: 40 - 42 dBA
OPTIMIZATION
1. The product has IIC = 66 according to the
standard ASTM E492-09
2. The product has STC = 68 according to the
standard ASTM E90-09
END OF DOCUMENT
Page 4 of 4