Pinout

Digital Inputs:
Used to turn a LED,
Zoom, Focus, etc.
To use with: TE-
031-000, TAM-043-
000, TAM-042-000
5V Regulator 600mA
P/N: TE-176-005
Power LED
Video Signal Out
G: Ground
S: Signal
Ethernet Connector:
Used for serial communication
and video.
5V Out, and
Battery voltage Out.
To use with Joysticks
P/N: TE-128-002
SuperDroid Robots Inc
Pin Out for Mini Remote V1.1
Programing
Port ICSP
Status Led
Arduino Mini
PAGE
2 OF 1
Battery
6V- 42V
Switch
Pin Use
0 Data TX to robot
1 Data RX From robot
2 To remote Rs485 Enable
3 Zoom_In
4 Zoom_Out
5 Focus Near
6 Focus Far
7 Select Up
8 Select Down
9 Light
10 Status Led 1
11 Status Led 2
12 Not used
13 Not used
A0 Tilt
A1 Pan
A2 Turn
A3 Drive
Arduino Pin Out Internal Connections