Manual

SST2 Robot Platform
SuperDroid Robots, Inc Contact
224 Technology Park Lane [phone]
Fuquay Varina, NC 27526 [e-mail]
www.SuperDroidRobots.com
Revised: May 22, 2018 Page 5 of 6
6. Roll the track onto the wheels (the motors will backdrive). If the tread is not tight enough roll the tread
back off, loosen up on the axle nut and slide the axle back towards the end of the slot. Do this until you
have enough tension on the track.
Electrical Assembly
For electrical assembly please find the schematic on our website:
Schematics
For additional support on wiring, soldering, and crimping, please read the following support pages:
Electric Motor Hookup Support
Electric Power Hookup Support
Soldering Tips
Crimping Wires