Data Sheet

SST Tracked Inspection Robot
with Pan and Tilt Camera
Overview
SuperDroid Robots, Inc | 224 Technology Park Lane | Fuquay-Varina, NC 27526
919-557-9162 | www.superdroidrobots.com
Revised: Oct 28, 2016
Standard Configuration
The SST Tracked Inspection Robot is a compact all-terrain
inspection robot that’s packed with features to get you
going right away.
The SST is designed and fabricated in North Carolina USA
and fully supported by SuperDroid Robots, an industry
leader in robotics. It is a smaller version of our MLT tank,
but is built with the same high level of quality, strength,
and power.
If you have a space to inspect that’s too small for you to
access, then the SST Tracked Inspection Robot is the
perfect solution!
Includes chassis, hardware, electronics, camera, LCD
monitor, etc.
SST Pair of Molded Splices Tracks and wheels set
Two IG32 Right Angle 12VDC 083 RPM Gear Motor
One LiPo 11.1V 2200 mAh battery providing a up to 2
hours of operation (depending on use)
The camera is a Wide View Color Infra Red Camera with
7 IR LEDs
Includes battery chargers
Sabertooth Dual 12A RC Motor Driver
LCD monitor and power supply
This robot includes a Spektrum DX5eTransmitter with
Receiver to wirelessly drive the robot
Includes 100ft of RCA cable for you to tether behind the
robot to get video signal back to you
Variable speed and direction differential drive/steering
Dimensions: ~6.75" Wide x ~9.5" long (tip to tip) and ~5
1/4" tall (top of camera) (2 5/8" track height).
Capacity: Handles 5lbs. of additional payload in most
terrains
Speed: Up to 60 fpm
Weight: The total weight of this robot configuration is ~4
lbs.
Assembly: Fully assembled, tested, and ready to go!
Applications
This robot is small enough to
get into almost any space that
you may need to inspect.
 Attics
 Culverts
 Crawl Spaces
 Ducts
 Etc.
(Images not shown to scale)