Data Sheet

SUPERDROID ROBOTS
TM
HD2 Treaded Robot
Page 4 of 7
AstroFlight Deluxe Charger with 100W Supply and Pelican Case:
o This is single charger with 100W power supply custom built into a Pelican case
o The charger can also be used to discharge the batteries
o The charger displays current input and peak voltages to verify proper charge
o Much faster charges can be obtained with this charger than the smart charger
o Charge one battery at a time
o One charger for charging all sizes of batteries (automatically detects battery size)
Other Custom Options Options:
• We specialize in custom solutions. The above are standard chassis with standard camera and control system.
• Please contact us with any questions or your custom needs.
• Below are some of the custom features we have made for the HD2 and/or or wheeled ATRs.
Game Pad Controller Option: Game pad controllers utilize two X-Y analog joysticks for
driving the robot and controlling the camera pan, and tilt. It also has 15 function buttons
for controlling things like camera zoom, lights, etc. The game pad is a PS2 controller
that is connected to a custom circuit board with an onboard microcontroller that reads
the PS commands and sends serial data. The serial data is sent to a belt worn wireless
2.4GHz 900MHz FCC approved transceiver, which relays the data to the robot. The
data is 2-way. A LCD provides status of the robot and also operates the rumble effect
on low voltage, etc. The belt worn 2.4GHz wireless data modem can control the robot at
about 300+ feet. A 900MHz 100mW system can operate about ½ mile and the 900MHz
1W system can operate beyond a mile line of site and will work through multiple walls.
If using video, the video and audio are received from a belt worn receiver and sent to the
mounted 3" or 7" LCD.
WiFi Controller Option: This option uses a WiFi connection similar to the one above, but
utilizes a Ultra-Compact PC. The Color touch screen LCD can be used to control the
robot and view the IP camera(s). The PC is mounted in a custom bracket with a
gamepad controller mounted to it. We provide a program so all the driving and control
of the robot is done using the using the robot control program using the game pad
controller and touch screen LCD.
Using the same WiFi connection an IP camera options can be viewed and controlled.