Data Sheet

Page 1 of 8 Revision Date: March 28, 2012
Robots, Parts, and Custom Solutions
www.SuperDroidRobots.com
Toll Free: (866) SDRobots
Phone: [phone]
Fax: [phone]
224 Technology Park Ln
Fuquay Varina, NC 27526
HD2-S Remote Surveillance Treaded Robot
HD2-S Treaded Robot Features:
 Wheels supported with inner and outer race sealed ball bearings (the wheels are NOT cantilevered or direct driven from the gear motor shaft).
 Wheels are driven with powerful 52mm diameter gear motors with heavy duty #35 chains.
 The treads and four powerful motors allow this robot to ascend/descend stairs and go over most terrain.
 Robot is enclosed and can be sealed making it water tight.
 Chassis is made from aircraft grade aluminum. The design uses all laser cut parts with mortise and tenon design for precise alignment and
mating of the parts. The frame is ribbed and gusseted making it very rigid. Welded construction using TIG and MIG for a solid chassis.
 It is about 38 inches long and 20 inches wide by about 9 1/2" high (tread height). There is a very large center cavity for batteries, electronics,
cameras, computers, etc. Wider chassis are also available (~26” wide).
 Custom Treads with aggressive All Terrain pattern. Positive traction. The composite rubber and UHMW wheels with timed teeth that match the
cutout pattern on the treads.