User Manual

SuperDroid Robots Inc. MLT Robot Data Sheet, Revised May 10, 2012
Page 2 of 4
MLT Compact Robot Specifications:
 Enclosed treaded robot chassis.
 Chassis made from heavy gage aluminum that is laser cut and CNC bent. Chassis seams are
welded. Entire body is coated flat black.
 Robot drop resistant to 10 feet.
 IR Camera in nose of robot. Color image with ambient light. Black and White in night mode.
 Flipper Arm/Stabilizer arm can be used to climb over objects up to 10 inches high. The arm
can be used as a wheelie bar or stabilizer. Arm can self-right the robot if inverted. A skilled
operator can climb household stairs.
 Compact design with all components carefully placed for optimum spacing and most effective
operation using solid modeling 3-D CAD software
 Two (2) planetary gear motors - one per side
 Motor controllers for variable speed and direction
 One 14.4VDC 2.2Ahr Li-Ion drive battery. Run time ~1 to 4 hours depending on use
 One 11.1VDC 1.8Ahr Li-Ion video power battery. Run time ~4 hours
 Toggle Power Key Switch
 Total weight of fully assembled robot: ~7.5lbs
 3.75” Composite cogged wheels that match a positive traction aggressive all terrain tread
 Total height (floor to top of treads): ~4.375 inches, total width: ~9.5 inches, total length: ~12.75
inches
 Ground clearance: ~1 inches
 Speed: 0 to 100 feet per minute, infinitely adjustable/controllable
MLT Compact Control Console Specifications:
 Integrated Joysticks
 2.4GHz for data
 900 MHz for Video
 Outdoor line of site range: 750 feet
 Indoor range: 300 feet
 Full control of speed and direction for drive motors.
 Full control of speed and direction for Flipper/Stabilizer arm
 5” color LCD for viewing video
 Extra channel(s) available for other custom options accessories.
 Total Weight of the control console: ~3.3 lbs
 Total height: ~4.5 inches, total width: ~10.75 inches, total depth: ~7 inches
Chargers:
 Three smart chargers provided. The
chargers are fully automatic and will charge
all the batteries simultaneously. 110VAC.
 An additional add-on for the charger is a
timer with cutoff circuit. The chargers should
not be left on indefinitely. This feature
provides a weekly timer that will maintain the
batteries so they are always topped off and
ready for use even after long storage.