Manual

MLT-42 Kit Assembly Manual
SuperDroid Robots, Inc Contact
224 Technology Park Lane [phone]
Fuquay Varina, NC 27526 [e-mail]
www.SuperDroidRobots.com
Revised: June 22, 2018 Page 3 of 8
Wheel and Track Assembly
Assemble the wheels. From the picture you can see how we assembled the drive wheels first
with the nuts on the inside. There is also a set screw on the side of the shaft that goes into the
motor shaft.
The idler wheels are assembled as shown. After this insert the bearings on each side of the
wheel.