Assembly Manual

Mecanum Wheel Vectoring Robot Platform – IG32 DB
SuperDroid Robots, Inc Contact
224 Technology Park Lane [phone]
Fuquay Varina, NC 27526 [e-mail]
www.SuperDroidRobots.com
Revised: April 25, 2018 Page 3 of 6
Mechanical Assembly
1. Start by mounting the motors to the chassis using the M3x8 screws. Use Loctite to insure the screws do not
vibrate loose.
2. Slide the steel hub onto the motor shaft so that it is very close the chassis and the screw heads but not
touching. Tighten the set screw down onto the flat part of the motor shaft. Use Loctite.