Assembly Manual

LT2-F Assembly Manual
SuperDroid Robots, Inc Contact
224 Technology Park Lane [phone]
Fuquay Varina, NC 27526 [e-mail]
www.SuperDroidRobots.com
Revised: June 19, 2018 Page 22 of 25
Chain Cutting
The easiest way to cut the chain is with a chain breaker tool, illustrated in Error! Reference source not found..
Figure 1 Chain breaker tool
Alternatively, clamp the chain in a vise and grind/file the ends of the pins down. Then drive the pin through the
chain. Refer to Error! Reference source not found., Error! Reference source not found., and Error! Reference
source not found..
Figure 2: Chain Cutting Setup