Assembly Manual

LT2-F Assembly Manual
SuperDroid Robots, Inc Contact
224 Technology Park Lane [phone]
Fuquay Varina, NC 27526 [e-mail]
www.SuperDroidRobots.com
Revised: June 19, 2018 Page 12 of 25
Slide the wheel with the sprocket on the front axle. Use a thrust bearing as a spacer. Put another thrust
bearing on and then a lock collar to hold everything in place.
Wrap the #25 chain around the sprockets and cut the chain to the nearest link. Make sure the motor is
slid forward in the slot so you can have plenty of adjustment after it is connected.
Install the master-link in the chain as shown.