Schematic

To Charger

SuperDroid Robots Inc

RC Mower

PAGE

1 OF 1

Batteries

Motor

Controller

S2|S1|5V|0V

M1A | M1B | B+ | B- | M2A | M2B

Motor

Right

Fuse/ Breaker

RC Receiver

Motor

Left

Notes:

1. Assembly should be performed by knowledgeable and skilled individual. SuperDroid Robots offers

assembly services if you are not comfortable reading schematics and performing work.

2. Wire gauges depend on load and size of motors.

3. Fuse size depends on load and size of motors.

4. Switch should be rated for at least the same amount of current as the fuse.

5. To charge batteries unplug them and use charger or run parallel wire with plug for charger.

6. Servo pigtail (TE-040-001) typically used. Receiver powered from motor controller (ensure motor

controller rated for receiver).

PAGE 1
Notes: 1. Assembly should be performed by knowledgeable and skilled individual. SuperDroid Robots offers assembly services if you are not comfortable reading schematics and performing work. 2. Wire gauges depend on load and size of motors. 3. Fuse size depends on load and size of motors. 4. Switch should be rated for at least the same amount of current as the fuse. 5. To charge batteries unplug them and use charger or run parallel wire with plug for charger. 6. Servo pigtail (TE-040-001) typically used.