Manual

Lawn Mower Chassis Upfit Robot
SuperDroid Robots, Inc Contact
224 Technology Park Lane [phone]
Fuquay Varina, NC 27526 [e-mail]
www.SuperDroidRobots.com
Revised: May 21, 2018 Page 6 of 12
5. To bolt the wheels on start by making a “stud” with the included screws. Insert the screws in the holes in
the hub and secure them in place with a nut. Now slide the wheel onto the studs and secure with another
nut against the rim of the wheel.
TIP: Letting some air out of the tire will make removing the screws in the rim and bolting the wheel to the
hub easier. DO NOT FORGET to put air back in the tires after bolting them on. If not inflated, the tube can
spin inside the rim and tear the valve stem.