Manual

Lawn Mower Chassis Upfit Robot
SuperDroid Robots, Inc Contact
224 Technology Park Lane [phone]
Fuquay Varina, NC 27526 [e-mail]
www.SuperDroidRobots.com
Revised: May 21, 2018 Page 10 of 12
9. We have also included an aluminum plate that connects the positive terminal of one battery to the
negative terminal of the other battery. This connects the batteries in series so there is 24 volts across the
other two terminals.
10. Next install the mower mount brackets to the frame. Spin a nut a couple of inches onto the threaded rod,
slide the threaded rod through the outer holes in the frame, and secure with another nut on top. The
threaded rod allows for the height adjustment of the mower. Leave it loose for now, until the mower is
mounted.
11. To mount the mower to the frame you’ll need to remove the mower’s wheels. Make a stud by inserting a
screw through one of the holes used to mount the wheel brackets (from the inside of the frame) and
securing it to the mower frame with a nut. When for studs are in place, lift the mower frame and insert
the studs into the mower mount brackets hanging from the frame. Secure with a nut on the other side of
the bracket.