Manual

IG42-SB4, 4WD All Terrain Robot Platform
SuperDroid Robots, Inc Contact
224 Technology Park Lane [phone]
Fuquay Varina, NC 27526 [e-mail]
www.SuperDroidRobots.com
Revised: February 8, 2019 Page 4 of 9
3. Mount the wheels to the shafts using the included hardware and Loctite.
4. Slide the wheel shaft onto the motor shaft with two shaft collars and a ball bearing (see image below for
proper order and orientation). Make sure the flat part of the motor shaft is accessible (if it is not use a
battery to spin the motor until it is) and line it up with the holes in the inner lock collar and wheel shaft.