User Manual

IG42-SB2 2WD Tube Mount Robot Platform
SuperDroid Robots, Inc Contact
224 Technology Park Lane [phone]
Fuquay Varina, NC 27526 [e-mail]
www.SuperDroidRobots.com
Revised: February 8, 2019 Page 3 of 9
Mechanical Assembly
1. Start by mounting the motors to the motor plates using the provided M4 screws. Use Loctite to keep the
screws from vibrating out.
2. Next mount the motor plate to the motor tube, again using Loctite or nyloc nuts.
3. Mount the motor tubes to the chassis plate using the provided #4-40 hardware.