User Manual

IG32-SB2 2WD Tube Mount Robot Platform
SuperDroid Robots, Inc Contact
224 Technology Park Lane [phone]
Fuquay Varina, NC 27526 [e-mail]
www.SuperDroidRobots.com
Revised: February 20, 2019 Page 9 of 11
10. An upper deck is available as an option. To mount, use the provided ¼-20 bolts and nuts. Use three nuts
per bolt as shown below.
Inflating the tires
Before running the robot on the ground, make sure the tires have been inflated. Running the robot with a flat
tire can cause the tube to spin inside of the tire and damage the valve stem. For this reason it is a good idea to
check the tires periodically to make sure they are inflated.