User Manual

IG32-SB2 2WD Tube Mount Robot Platform
SuperDroid Robots, Inc Contact
224 Technology Park Lane [phone]
Fuquay Varina, NC 27526 [e-mail]
www.SuperDroidRobots.com
Revised: February 20, 2019 Page 6 of 11
6. Mount the bearing plates onto the omni wheel using the provided hardware. Next mount the omni wheel
to the chassis mount brackets. Make sure to use a bronze sleeve bearing and a plastic spacer on each side
of the wheel and use the 3/8 bolt as the shaft. Tighten bolt with locknut enough so that there isn’t a lot of
side to side play in the wheel but it still spins freely.