Data Sheet

SuperDroid Robots Inc. LT-F Data Sheet, Revised February 6, 2010
Page 2 of 7
LT-F Robot Specifications:
Enclosed treaded robot chassis with new integrated flush camera tilt system in the nose of the robot.
Patent Pending Flipper Arm/Stabilizer arm can be used to climb over objects as tall as the robot is
long. The arm can be used as a wheelie bar from climbing up stairs, etc.
Compact design with all components carefully placed for optimum spacing and most effective operation
using solid modeling 3-D CAD software
Two (2) planetary IG52-04 285RPM 24VDC gear motors - one per side
One 22.2VDC 10Ahr Li-Ion drive battery. Run time ~2.5 to ~8 hours depending on use
11.1VDC 5Ahr Li-Ion video power battery. Run time 7-10 hours
Custom Dual 25Amp drive dual motor controller specifically designed for this robot
Custom 10Amp Flipper arm motor controller specifically designed for this robot
Fuse blocks, terminal blocks, charging ports, switch, etc. all integrated into the design
Integrated nylon carrying strap on the rear or the robot
Chassis made from heavy gage aluminum that is laser cut and CNC bent. Chassis seams are welded.
Entire body is coated flat black.
Total weight of fully assembled robot: ~40lbs
Total height (floor to top of treads or camera housing): ~7 inches, total width: ~16.25 inches, total
length: ~26 inches
7” composite rubber and UHMW cogged wheels that match a positive traction aggressive all terrain
tread
Ground clearance: ~2 inches
Speed: 0 to 5 feet per second, infinitely adjustable/controllable
LT-F Control Console Specifications:
Other custom versions are also available such as WiFi,
Gamepad controller, etc.
Standard version include the following:
o 2.4GHz frequency spectrum control system
(searches for best most reliable channel) with a Fail
Safe long range dual receiver
o 900MHz video transmitter and receiver
o Tested urban range 200+ yards (effective operation
range for video and control with multiple building
structures, wireless interference, etc. Concrete and
steel walls will reduce range further)
o Tested rural line of site range 1000+ feet
o 7” color wide screen LCD for viewing video
o Full control of speed and direction for drive motors.
o Position control of camera tilt
o Full control of speed and direction for
Flipper/Stabilizer arm
o Visible indication lights for flipper arm position
o Extra channel(s) for lights or other custom options.
o Includes rechargeable NiMH batteries for control
console and video
o Pelican case with 7”LCD mounted in the lid and controls mounted in base.
o Light weight can be carried and operated or placed on hood of car or table and operated
o Convenient transport case doubles as operator console, just flip it open, erect antennas, and
turn it on.