Manualshelf

Operation Instructions

ManualsBrandsSuperDroid Robots ManualsUsed and Surplus Items7 Chan High Cur TTL Driver with 4 Power 5V Relays
9101112131415161718
Page 16 of 18 Revision Date: February 20, 2007
SuperDroid Robots Inc
http://www.SuperDroidRobots.Com
Assembly of the DPDT and SPDT Reversing RC Switch Relay board:
1. Start by laying the board out in front of you. The Label should be on the left topside. Refer to
Figure 8.
Figure 8: DPDT and SPDT RC Switch Relay Board
2. Insert all the LEDs as shown in Figure 8. The short leg of the LED should go into the square
pad. (they will not work if put in the other way).