User's Manual

12
2 Before Use
Battery
In the initial state, the battery has been charged about 50% and thus it can be used upon
unpacking. Don’t charge the battery unless it is used up completely for the first three times.
Only in this way can the battery reach the optimal working state.
Charge the Battery
 Plug the charger into the power socket.
 Insert the connector of the charger into the right top of the mobile phone (always keep
the face with arrowhead upward).
 In such case, the power indication icon on the upper right corner of the screen will flash
circularly. If the phone is switched off when it is charged, there will be the page
indicating the ongoing charging of the battery. If the phone is still used when the battery
has low power, the charging indication icon will not appear on the screen until certain
time has passed by.
 When the power indication icon on the upper right corner of the screen is full and keeps
still, it will indicate that the charging is over. If the phone is charged in switch-off status,
the screen will indicate the icon of charging completed. This process generally needs
3~4h. During charging, the battery, the phone and the charger may get hot, which is
normal.
 After the charging is over, disconnect the AC power socket from the phone and the