User's Manual
Table Of Contents
- 1 Introduction
- 2 Technical Specifications
- 1 x RF 433MHz ASK\FSK Transmitter module
- 2 x LF 125KHz OOK Receiver module
- Case tamper
- Motion sensor
- Strap tamper (Optional)
- Indication LED
- Internal battery 3v
- 3 Abstract
- /
- 4 Operational description
- This model currently has two sub-models (P/Ns):
- PRF-PURET15EM is targeted for the EM market (Electronic Monitoring) to be used to track and monitor offenders while in house arrest.
- The unit comes in a sophisticated ankle enclosure to prevent the offender to take it off easily.
- The unit immediately alerts when the offender trying to remove or sabotage the unit.
- The unit alerts whenever the offender tries to leave his premises when not allowed.
- The unit shall be sold to governments and police departments around the world, along with detailed installation instructions depended on their specific requirements and needs.
- /
- PRF-PURET15AT is targeted for asset management system, to be used to track and monitor inventory/asset.
- The unit comes in mini round enclosure to be smaller as possible to be less noticeable.
- The unit alerts when it’s taken off from an item that being monitored.
- The unit can be used in access control and asset management systems. It is supplied with detailed installation instructions depended on the specific requirements and needs of the distributor/buyer.
- The unit may come with slightly different designs since it can be used with a logo sticker / logo engraved or simply without a logo.
- Example with a sticker logo:
- /
- 5 References
- 6 Appendix A:
- The tables below describe the sensor combination that can be for any PRF-PURET15,
- For PRF-PURET15XX series:
- /
User Manual - PURETAG v1.5
Confidential & Proprietary Page 7 of 12
2 6BTechnical Specifications
2.1 35BInterfaces and MMIs
2.1.1 41BRF
11B1 x RF 433MHz ASK\FSK Transmitter module
12B2 x LF 125KHz OOK Receiver module
2.1.2 42BTampers & Sensors
13BCase tamper
14BMotion sensor
15BStrap tamper (Optional)
2.1.3 43BMMI
16BIndication LED
2.2 36BPower
17BInternal battery 3v
2.3 37BOperational temperature
-20°C to +60°C