User's Manual
Table Of Contents
- 1 Introduction
- 2 Technical Specifications
- 1 x RF 433MHz ASK\FSK Transmitter module
- 2 x LF 125KHz OOK Receiver module
- Case tamper
- Motion sensor
- Strap tamper (Optional)
- Indication LED
- Internal battery 3v
- 3 Abstract
- /
- 4 Operational description
- This model currently has two sub-models (P/Ns):
- PRF-PURET15EM is targeted for the EM market (Electronic Monitoring) to be used to track and monitor offenders while in house arrest.
- The unit comes in a sophisticated ankle enclosure to prevent the offender to take it off easily.
- The unit immediately alerts when the offender trying to remove or sabotage the unit.
- The unit alerts whenever the offender tries to leave his premises when not allowed.
- The unit shall be sold to governments and police departments around the world, along with detailed installation instructions depended on their specific requirements and needs.
- /
- PRF-PURET15AT is targeted for asset management system, to be used to track and monitor inventory/asset.
- The unit comes in mini round enclosure to be smaller as possible to be less noticeable.
- The unit alerts when it’s taken off from an item that being monitored.
- The unit can be used in access control and asset management systems. It is supplied with detailed installation instructions depended on the specific requirements and needs of the distributor/buyer.
- The unit may come with slightly different designs since it can be used with a logo sticker / logo engraved or simply without a logo.
- Example with a sticker logo:
- /
- 5 References
- 6 Appendix A:
- The tables below describe the sensor combination that can be for any PRF-PURET15,
- For PRF-PURET15XX series:
- /
User Manual - PURETAG v1.5
1 Introduction
1.1 About this Guide
This User Guide contains important information for users of the PRF-PURET15 product and all of its
series.
This guide introduces the PRF-PURET15 and provides instructions on how to install, configure,
operate, and troubleshoot the device. Each section has both written and graphically explanations to
provide the technical information necessary to be successful at using, installing, and configuring the
PRF-PURET15 device.
1.2 Important Information
SuperCom Inc. reserves the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service
without notice. Customers should obtain the latest relevant information before placing orders and
should verify that such information is current and complete. All products are sold subject to SuperCom
Inc.’s terms and conditions of sale supplied at the time of order acknowledgment.
SuperCom Inc. warrants performance of its hardware products to the specifications applicable at the
time of sale in accordance with SuperCom Inc.’s standard warranty. Testing and other quality control
techniques are used to the extent SuperCom Inc. deems necessary to support this warranty. Except
where mandated by government requirements, testing of all parameters of each product is not
necessarily performed.
SuperCom Inc. assumes no liability for applications assistance or customer product design. Customers
are responsible for their products and applications using SuperCom Inc. components. To minimize the
risks associated with customer products and applications, customers should provide adequate design
and operating safeguards.
SuperCom Inc. does not warrant or represent that any license, either express or implied, is granted
under any SuperCom Inc. patent right, copyright, mask work right, or other SuperCom Inc. intellectual
property right relating to any combination, machine, or process in which SuperCom Inc. products or
services are used. Information published by SuperCom Inc. regarding third-party products or services
does not constitute a license from SuperCom Inc. to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the
patents or other intellectual property of the third party, or a license from SuperCom Inc. under the
patents or other intellectual property of SuperCom Inc.
Resale of SuperCom Inc. products or services with statements different from or beyond the
parameters stated by SuperCom Inc. for that product or service voids all express and any implied
warranties for the associated SuperCom Inc.
Product or service and is an unfair and deceptive business practice. SuperCom Inc. is not responsible
or liable for any such statements.
All company and brand products and service names are trademarks or registered trademarks of their
respective holders.