TABLE OF CONTENTS BASIC MENU LAYOUT................................................................................................................................................................... 3 BEFORE YOU BEGIN.....................................................................................................................................................................
BEFORE YOU BEGIN LIST OF COMPONENTS CARB/EPA COMPLIANCE BUTTON FUNCTIONALITY DISPLAY DEVICE Up_Increase Left Back Exit Right Next OK Forward Down_Decrease USB CABLE PROTECTIVE BAG NAVIGATING TIPS: • To move back to the previous menu, press the button. • To move forward to the next menu, you can press either OK or button to enter the highlighted option. • The & buttons are used to select menu options, as well as adjust values for certain features.
DOWNLOAD IGNITION UPDATER TOOL 1 Go to: www.superchips.com 2 Click the UPDATES tab located at the top of the page. 3 Click the Download button to download Ignition. 1 2 3 4 Click the Run button on the pop-up menu. Ignition 5 Read and click the box to accept the license agreement terms. 6 Click the Install Button, then the Close button once the download is complete. 7 Double-click the Ignition desktop icon. 8 Fill out the registration form. 4 9 Refer to the next section for performing product update.
PRODUCT UPDATES USING IGNITION 1 Double-click the Ignition Icon located on your computer’s desktop. 1 2 Connect your device to the computer using the supplied USB cable. (Ignition will automatically search for updates related to your device.) 3 3 Click the Update button. (The update process will start and finish automatically. Once the update is complete, you may be directed to the Online Store. To further update your device using the online store, refer to the following steps.
QUICK TUNE Quick Tune = Changes the power level of your vehicle using the most popular features and settings. NOTE: Not all features are available on every make, model, and engine. STEP 2 - Enter the Tuning Menu by pressing OK. STEP 1 - Plug the device into the OBDII port. (The device will automatically power-on once it has been connected.) STEP 4 - Follow the on-screen instructions. Loading your Vehicle Application... STEP 5 - Allow the device to save your stock files.
TUNING LEVELS EXPLAINED KEY: x= Towing is not recommended for this tune . S= Octane Requirements vary for gas vehicles. Follow recommended guidelines on the device. $= Tow rated up to Superchips recommended tow limits. See limits for your vehicle displayed by the Flashpaq during the programming process. 0= Tow rated up to OEM max towing recommendation.
ADVANCED TUNING OPTIONS Change the power level of your vehicle using custom options and settings. NOTE: Not all features are available on every make, model, and engine. STEP 5 - Press OK to customize options. Rev Limiter Speed Limiter Gear Ratio Tire Size Fan Temp AFM / DOD Continue WARNING Do not program your vehicle while parked in unsafe locations including heavy traffic or places without cell phone service. STEP 2 - Enter STEP 3 - Follow the Tuning Menu the on-screen by pressing OK. instructions.
ADVANCED TUNING OPTIONS EXPLAINED Availability of specific options may vary based on your vehicle’s make and model: --------------------------------------------------------------------------------------------------------------------------------- Speed Limiter - Adjusts the top speed limiter by increments or fixed values. i The vehicle must have appropriate speed rated tires. i Do not exceed proper operating conditions. i Obey all traffic laws. i For use only on a controlled track.
COMMON TUNING QUESTIONS RETURNING YOUR VEHICLE TO STOCK STEP 1 - Plug the device into the OBDII port. STEP 2 - Enter the Tuning Menu by pressing OK. STEP 3 - Turn the ignition on, but do not start the engine. STEP 4 - Select the Stock option from the list. Select Tuning Performance Tow 87 Octane Mileage XS SAVE Stock w/ Options Stock STEP 5 - Install the Stock File by pressing OK. STEP 6 - Allow STEP 7 - Turn the STEP 8 - Press the stock settings Ignition Off. Press OK to return to to be re-installed.
QUICK OPTIONS QUICK OPTIONS EXPLAINED For specific Dodge vehicles, the option to modify various features using Quick Options is available. NOTICE: Do not remove or bump the OBD-II connector while changing Quick option settings. If you do, the vehicle may not start. WARNING Do not make adjustments to your vehicle while parked in unsafe locations including heavy traffic or places without cell phone service. STEP 1 - Enter STEP 2 - Select the Tuning Menu Quick Options. by pressing OK.
CLEAR DTC READ DTC This feature allows you to troubleshoot issues that your vehicle may be experiencing. Most vehicles will illuminate the in-dash check engine light. A Diagnostic Trouble Code (DTC) arises when a vehicle’s computer detects a sensor failure or a parameter outside of specific range. STEP 1 - Enter the STEP 2 - Select Scan Menu. Read/Clear DTCs. STEP 3 - Select Read DTCs. STEP 5 - Allow the STEP 6 - Read and STEP 7 - Push the device to search for follow the on-screen / arrows to DTCs.
VIEWING GAUGES DATA LOGGING If you would like to view Parameter IDs (PIDs) specific to your vehicle, following these instructions to learn how to view them using your Flashpaq device. WARNING Do not exceed legal speed limits on public roadways. STEP 1 - Enter the STEP 2 - Select Scan Menu. Gauges/Datalog. STEP 3 - If asked, turn ignition on, but do not start. WARNING Do not exceed legal speed limits on public roadways. STEP 4 - Follow the on-screen instructions.
BATTERY VOLTAGE DATA LOGGING RETRIEVAL To learn more about how Data Logging results can be extracted from the device, please follow these instructions: STEP 1 - Remove the device from the vehicle OBDII port. STEP 2 - Using the USB cable provided, connect the device to your computer. STEP 1 - Plug the device into the OBDII port. STEP 2 - Enter the Scan Menu. STEP 3 - Select the Battery Voltage option. STEP 4 - Press OK to return to the previous screen.
VEHICLE INFO DEVICE INFO STEP 1 - Plug the device into the OBDII port. STEP 2 - Enter the Info Menu. STEP 1 - Plug the device into the OBDII port. STEP 3 - Select the ID Vehicle option. STEP 4 - Press OK to return to the previous screen. TUNING LEVEL Stock VIN ################# Vehicle Files ######## 28 STEP 2 - Enter the Info Menu. STEP 3 - Select the Device Info option. STEP 4 - Press OK to return to the previous screen.
TROUBLE SHOOTING My Flashpaq does not power up when plugged into the OBDII port? PYour vehicle’s OBDII port is powered through a fuse the fuse may be blown. (In most vehicles, this is the same fuse shared by the cigarette lighter) PTry the Flashpaq on another vehicle to make sure it powers up. If it does, then the wiring on the vehicle you are trying to program may be the issue (See your dealer for service).
TROUBLE SHOOTING CONT’D You are now able to start your vehicle normally. You may now attempt to program your vehicle again. In the event that recovery is unsuccessful or fails to complete the programming cycle, a status message will display on the programmer. Please make note of the message displayed and contact Superchips Customer Care at 407.585.7000. ---------------------------------------------------------------------------My programmer shows a ‘vehicle calibration not on file’ status.
SAFETY GUIDELINES SAFETY WARNING & CAUTION Throughout this User Manual you will see important messages regarding your safety or the protection of your vehicle. These messages are designated by the words WARNING, CAUTION, or NOTICE. WARNING A WARNING indicates a hazardous situation which, if not avoided, will result in death or serious injury. WARNING Before using device, read and understand the user manual, including these additional safety instructions.
LIMITED 1 YEAR WARRANTY Powerteq, LLC, (hereafter “SELLER”), subject to the conditions and limitations set forth herein, warrants to the original consumer purchaser only that each Insight Pro product sold by SELLER (the “Product”) through an authorized dealer will be free from defects in material and workmanship under normal operating conditions for one (1) year after the date of purchase.
VEHICLE WARRANTY INFO Many of our customers ask, “Will your product void my vehicle’s manufacturer’s warranty?” Powerteq is committed to providing quality products that are safe to use. Our products do not cause damage to a vehicle when used as intended in accordance with the User Manual and should not void your vehicle’s manufacturer’s warranty. whatever modifications you have added to your vehicle actually caused the problem in question.
WWW. .COM 1790 East Airport Blvd. | Sanford, FL 32773 | Ph: 407.585.
