User Manual

LED Bollard Light
Important: Read all instructions prior to installation.
BLRB and BLSB Series
4400 Earth City Expy, St. Louis, MO 63045 866-590-3533 superbrightleds.com
Rev Date: V1.0 01/11/2022
User Manual
1. With installation kit mounted and cement/concrete cured, mount bollard base
using provided installation kit hardware and connect wiring using terminal block.
When making adjustments, switch supply power to the light o󰀨
if it is already installed. To select wattage and CCT, remove the
light section to access the switches located on the bottom. Slide
the selector switch to the desired setting, then reinstall the light
section of the bollard.
CCT and wattage adjustment switches
Bollard Installation
CCT and Wattage Selection (applicable models only)
hheexx wwrreenncchh
hheexx wwrreenncchh
2. Rotate bollard and place in position over bollard base.
3. Tighten set screws to secure bollard to base.
12W 16W 22W
3000K 4000K 5000K