Operation Manual

-4-
4) Attach control panel onto chassis.
A. Make the right hollow of control panel aim at the right bulge of chassis, then push
and hold control panel rightwards; at one time, move the left end of control panel
towards chassis to make the left hollow of control panel aim at the left bulge of
chassis and then release holding .
B. Flip control panel up till hearing a click sound to attach onto chassis.
* How to clean panel connector
Frequent detachment will deteriorate panel connectors. To minimize deterioration,
periodically wipe the panel connectors with a clean/soft/dry cloth .
5) Testing it for making sure that it can work properly .
3. Installing main unit according to installation diagram on next page:
1) Mount main unit at position of car A/V system;
2) Bend some tabs of sliding metal housing to fix sliding metal housing so that
the front part of main unit is fixed;
3) Use metal strap to fix the rear part of chassis.
* Uninstalling main unit:
1) Remove metal strap from main unit;
2) Remove plastic trim frame from main unit;
3) Insert a key plate into left and right side of main unit and draw main unit out of
sliding metal housing.
Bulge
Hollow
Bulge
Hollow
Panel Connector