Operation Manual

-10-
5. Radio Operation
1. BAND button
To switch between FM1,FM2,FM3,MW1 and Mw2.
2. |<< & >>| or < & > buttons
In standby mode or after no manually searching operation for a while, briefly
press one of them to automatically search down or up for an available station and
listen to it.
To manually search down or up for a desired station and listen to it, long press
one of them to enter MANUAL mode, then briefly press one of them step by step.
3. SCAN button
To automatically search up for an available station and listen to it.
4. APS button
To scan for every preset station of FM or MW, short press APS button;
To preset station for every memory bank of FM or MW, long press APS button.
5. CH1-6 or 1~6 buttons
To listen to a preset station, first switch on a desired band, then continuously
press CH1-6 button or press one of 1~6 buttons to find it and listen to it.
To preset current station on a memory bank, long press one of 1~6 buttons.
To preset a station in a memory bank with CH1-6 button, first press BAND button
to select a desired band; then press CH1-6 button to select a desired memory
bank; and then use |<< or >>| button to search for a desired station; finally long
press CH1-6 button to store the station in the memory bank.
6. b
When PTY group is on, one of 6 number(1~6) can select one of
typed programs.
After selecting one of typed programs, it will automatically search for a station
broadcasting the selected typed program. If no any stations broadcasting the typed
program exist, it will return back to normal station.
PTY utton
Pressing PTY button on remote control or long pressing PTY button on control
panel can switch between PTY music group, PTY speech group and OFF.
pressing buttons