Datasheet

RAIDDrive II PCIe SSD Datasheet
Rev 1.0 July 2011 Page 19
6.0 ELECTRICAL SPECIFICATIONS
6.1 POWER SUPPLY REQUIREMENTS
Power Rail
Voltage Tolerance
Supply Current
Capacitive Load
+3.3V
Max +/-9%
Max 3.0A
Max 1000µF
+12V
Max +/-8%
Max 2.1A
Max 1000µF
+3.3Vaux
Max +/-9%
Wakeup Enabled-Max 375mA
Non-wakeup Enabled-Max 20mA
Max 150µF
7.0 ENVIRONMENTAL SPECIFICATIONS
Operating Temperature: Commercial Temp Range Only
 Commercial +0°C to +70°C
Storage Temperature: -40°C to +70°C
Humidity: 5% to ~ 90% RH
8.0 QUALITY AND RELIABILITY SPECIFICATIONS
Data Retention: Maximum of 10 years
Wear Leveling: Dynamic and static wear-leveling
Bad Block Management: Drive will self identify bad blocks and remap physical to logical
addresses to avoid bad blocks.
ECC/EDC (Error Correction Code/Error Detection Code): Built in error detection and correction
will correct physical bit errors in NAND.
MTBF: >1,500,000 hours
Power Cycle: TBD
9.0 COMPLIANCE SPECIFICATIONS
All RAIDDrive II are compliant with the following standards and regulations:
 RoHS