User`s guide

USB 3.0 SuperCrypt™
Setting the password – Password Management
In order to set the password, use the Password Management tab. Here the user can
set or change the password used to unlock the secure partition. Simply type in your
password, confirm it and leave a hint to remind yourself of the password in the
future.
Advanced
The Advanced Tab enables the user to Remove
the Password or Reset the drive. Resetting the
drive is destructive and changes the hardware security key and thus provides a
valuable erase feature. Removing the password is non-destructive and simply
removes the password verification process before opening the secure partition.
Note: The hardware encryption algorithm utilized on the SuperCrypt drive has no effect on drive performance.
Driver Installation
For information regarding the installation of our enhanced USB 3.0 drivers, see the document “USB 3.0 Installation
Instructions.pdf”, located on our website.