User's Manual

RW6400 WIRING DIAGRAM
GREEN TRIGER(-) TO START/STOP ENGIN
BROWN (+)SIREN
BROWN/WHITE (-)HORN
BLACK/WHITE (-)500mA DOME LIGHT
GREEN/RED (-)AUX 1
BLUE/BLACK (-)AUX 2
BLUE/WHITE UNLOCK 2(-)
ORANGE (-)START KILL/ANTI GRIND
ORANGE/BLACK OEM DISARM
OVERRIDE
SWITCH
SHOCK
SENSOR
LED
NPC3
Module
(Optional)
PINK
BLACK For GLOW PLUG(-) INPUT
RED +12VDC
PURPLE DOOR INPUT(+)
GREEN DOOR INPUT(-)
BLUE HOOD INPUT (-)
PINK CAR JACKING or GLOW PLUG(+) INPUT (Diesel engine only)
WHITE PEDAL BRAKE(+) RESET INPUT
BROWN (+) STARTER
GRAY (+) ACCESSORY
RED (+) 12VDC
RED (+) 12VDC
PINK (+) IGNITION (IN/OUT)
WHITE (+) PARKING LIGHT(12 Amp)
(F2WA-1)
(NPC3)
30Am
p
FUSE
30Amp FUSE
WHITE/RED TO TACHOMETER
BLACK GROUND
YELLOW/WHITE (-) ACC 2
YELLOW (-)IGNITION 2
GREEN LOCK(-)
RED (+)12 VDC
BLUE UNLOCK(-)
ATT: Do not connect White/ Red wire to tachometer,
if decide to use TACH less engine monitor.
(smart sensor)
* : Whenever connect White/ Red wire to
tachometer, This system automatically turn to
“TACH-Learning” mode.
IGNITION COIL
＋ －
(SKIN OFF TACHOMETER WIRE AND CONNECT TOGETHER)
This system has TACH less engine monitor feature, even without connect any detection wire, still will
have smart cranking ability, cranking time auto-adjust depends on voltage changing .