User's Manual

5-18
SUPERSERVER 5016I-T/5016I-TF User's Manual
LAN1/LAN2 (Ethernet Ports)
Two Ethernet ports are located on the
I/O backplane. These ports accept
RJ45 type cables.
NC = No Connection
Serial Ports
Two serial ports are included on the
X8SIL/X8SIL-F. See the table on the
right for pin defi nitions.
Serial Port
Pin Defi nitions
Pin # Defi nition Pin # Defi nition
1 DCD 6 DSR
2 RXD 7 RTS
3 TXD 8 CTS
4 DTR 9 RI
5 Ground 10 NC
Universal Serial Bus (USB)
Two Universal Serial Bus ports (USB
0 and USB 1) are located on the I/O
backplane. Additionally, a Type A
USB header (USB4) and two USB
connections (USB2/3 and USB 10/11,
X8SIL-F only) are provided on the
motherboard to provide front chassis
access. (Cables are not included).
See the tables on the right for pin
defi nitions.
USB Port
Pin Defi nitions
Pin# Defi nition Pin# Defi nition
1 +5V 5 +5V
2 USB_PN1 6 USB_PN0
3 USB_PP1 7 USB_PP0
4 Ground 8 Ground
Front Panel USB Port
Pin Defi nitions
USB 8, 9, 10
Pin # Defi nition
USB 11
Pin # Defi nition
1 +5V 6 +5V
2 USB_PN2 7 USB_PN3
3 USB_PP2 8 USB_PP3
4 Ground 9 Ground
5 No Con-
nection
10 Key
Speaker
On the JD1 header, pins 3~4 are used
for internal speaker. Close pins 3~4
with a cap to use the onboard speaker.
If you wish to use an external speaker,
close pins 1~4 with a cable. See the
table on the right for pin defi nitions.
Speaker Connector
Pin Defi nitions
Pin Setting Defi nition
Pins 3~4 Internal Speaker
Pins1~4 External Speaker