User's Manual

5-4

SUPERSERVER 5016I-T/5016I-TF User's Manual

5-4 I/O Ports

The I/O ports are color coded in conformance with the PC 99 speciﬁ cation. See

Figure 5-2 below for the colors and locations of the various I/O ports.

Figure 5-2. I/O Ports

1. Keyboard (Purple) 6. COM1 Port

2. PS/2 Mouse (Green) 7. VGA Port (Blue)

3. USB Port 0 8. LAN1

4. USB Port 1 9. LAN2

5. IPMI LAN Port*

5-5 Processor and Heatsink Installation

When handling the processor package, avoid placing direct pressure on

the label area of the fan.

Notes:

Always connect the power cord last and always remove it before adding, re-

•

moving or changing any hardware components. Make sure that you install the

processor into the CPU socket before you install the CPU heatsink.

If you buy a CPU separately, make sure that you use an Intel-certiﬁ ed multi-

•

directional heatsink only.

Make sure to install the serverboard into the chassis before you install the CPU

•

heatsinks.

When receiving a serverboard without a processor pre-installed, make sure that

•

the plastic CPU socket cap is in place and none of the socket pins are bent;

otherwise, contact your retailer immediately.

Refer to the Supermicro web site for updates on CPU support.

•

6 7 8 9

*X8SIL-F only