User's Manual

1-8
X9DRG-HF/X9DRG-HTF Motherboard User’s Manual
I/O Devices
SATA Connections
• SATA Ports Two (2): SATA 3.0 Ports (I-
SATA1~I-SATA2)
Four (4) SATA 2.0 Ports (I-
SATA2~5) (from AHCI)
Four (4) SATA 2.0 Ports (S-
SATA0~3) (from SCU: Storage
Control Unit)
• RAID RAID 0, 1, 5, 10
IPMI 2.0
• IPMI 2.0 supported by the Nuvoton WPCM450R
BMC
Serial (COM) Port
• One (1) Fast UART 16550 Connection: 9-pin RS-
232 port
Super I/O
• Winbond Super I/O 83527
Peripheral
Devices
USB Devices
• Two (2) USB ports on the rear I/O panel (USB 0/1),
BIOS
• 16MB SPI AMI BIOS
®
SM Flash BIOS
• APM 1.2, PCI 2.3, ACPI 1.0/2.0/3.0, USB Keyboard,
Plug & Play (PnP) and SMBIOS 2.5
Power
• ACPI/ACPM Power Management
Management
• Main switch override mechanism
• Keyboard Wake-up from Soft-Off
• Power-on mode for AC power recovery
• Intel
®
Intelligent Power Node Manager
• Management Engine
PC Health
CPU Monitoring
Monitoring
• Onboard voltage monitors for 1.8V, +3.3V, 3.3VSB,
+5V Standby, 1.35V, 1.5V, Chipset Voltage, and
Battery Voltage.
• CPU 6-Phase switching voltage regulator
• CPU/System overheat LED and control
• CPU Thermal Trip support
• Thermal Monitor 2 (TM2) support