User manual

Chapter 5: Advanced Motherboard Setup
5-5
Figure 5-3. Installing the Heatsink
3. Once the CPU is loose, remove the it from the CPU socket.
4. Clean the surface of the CPU and the heatsink, removing the used thermal
grease. Reapply the proper amount of thermal grease on the surface before
re-installing the CPU and the heatsink.
Figure 5-4. Removing the Heatsink
Screw #1
Motherboard
Loosen screws in the
sequence shown
Screw #2
Screw #3
Screw #4