User's Manual

 LSI2108/2208SASMegaRAIDCongurationUtilityUser'sManual
2-16
Event Class: Select the class level for the event search. Available classes include:
•Informational: This type of event is informative only and does not require
user action.
•Warning: This type of event indicates a component that may cause a failure.
•Critical: This type of event affects system stability. User intervention is re-
quired to solve the problem before the system becomes unstable.
•Fatal: This type of event indicates that some component has failed and that
data loss will occur or has occurred.
•Dead: This type of event indicates that a devastating error occurred, result-
ing in controller failure. This error will only be seen if the controller has
been restarted.
Start Sequence#: Based on the range of sequences (events) that are logged, enter
a sequence starting point for the event search.
# of Events (Maximum 248 at a time): Enter the number of events to search
beyond the Start Sequence#. For example, if the Start Sequence# is set at 200
and the # of Events is set at 40, a search will be performed on events 200 - 240.
2-12 Exit
After you have congured RAID settings, return to the main page and use the <Tab>
key or the mouse to select Exit. A screen displays prompting you to conrm exiting.
Select No to return to the LSI RAID Utility. Select Yes to exit, at which point you are
prompted to reboot your system. Press <Ctrl> + <Alt> + <Del> to reboot the system.