User's Manual

SBI-7226T-T2 Blade Module User’s Manual
6-12
PCI Express Configuration
The menu options in the PCI Express CONFIGURATION submenu and their descriptions
are shown in Table 6-15.
SMBIOS Configuration
The menu options in the SMBIOS CONFIGURATION submenu and their descriptions are
shown in Table 6-16.
Remote Access Configuration
The menu options in the REMOTE ACCESS CONFIGURATION submenu and their
descriptions are shown in Table 6-17.
Table 6-15. PCI Express Configuration Submenu
Menu Option Description
Active State Power
Management
This setting allows you to Enable or Disable PCI Express L0s and L1 link power
states.
Table 6-16. SMBIOS Configuration Submenu
Menu Option Description
SMBIOS SMI Support
This setting allows you to Enable or Disable the SMBIOS SMI Wrapper support
for PnP func 50h-54h.
Table 6-17. Remote Access Configuration Submenu
Menu Option Description
Remote Access
Allows you to Enable or Disable remote access. If enabled, the settings below
will appear.
Serial Port Number
Selects the serial port to use for console redirection. Options are COM1 and
COM2.
Serial Port Mode
Selects the serial port settings to use. Options are (115200 8, n, 1), (57600 8,
N,
1), (38400 8,
N, 1), (19200 8, N, 1) AND (09600 8, N, 1).
Flow Control
Selects the flow control to be used for console redirection. Options are None,
H
ARDWARE and SOFTWARE.
Redirection After
BIOS POST
Options are D
ISABLE (no redirection after BIOS POST), BOOT LOADER
(redirection during POST and during boot loader) and Always (redirection
always active). Note that some OS's may not work with this set to Always.
Terminal Type Selects the type of the target terminal: ANSI, VT100 and VT-UTF8.
VT-UTF8 Combo Key
Support
Allows you to Enable or D
ISABLE VT-UTF8 combination key support for ANSI/
VT100 terminals.
Sredir Memory
Display Delay
Use this setting to set the delay in seconds to display memory information.
Options are No Delay, 1
SEC, 2 SECS and 4 SECS.