User's Manual

SBI-7226T-T2 Blade Module User’s Manual
6-10
Event Log Configuration
The menu options in the EVENT LOG CONFIGURATION submenu and their descriptions are
shown in Table 6-11.
IPMI Configuration
The menu options in the IPMI CONFIGURATION submenu and their descriptions are
shown in Table 6-12. These options are only available with the SBI-7226T-T2 blade
module.
SATA Port 0~5
This setting selects the type of device connected to the system.Options include
Auto or Not Installed.
S.M.A.R.T.
S.M.A.R.T stands for Self-Monitoring, Analysis and Reporting Technology. This
setting Enables or Disables the S.M.A.R.T. feature.
Table 6-11. Event Log Configuration Submenu
Menu Option Description
View Event Log Highlight this item and press <ENTER> to view the contents of the event log.
Mark All Events as
Read
Highlight this item and press <ENTER> to mark all events as read.
Clear Event Log
Select Yes and press <E
NTER> to clear all event logs. The options are YES and
N
O to verify.
Table 6-12. IPMI Configuration Submenu
Menu Option Description
IPMI Information
Display (Static)
This static display provides information for the Status of BMC and IPMI Firmware
Revision.
 View BMC System
Event Log
This sub-menu allows you to view all events in the BMC Event Log. It will take a
maximum of 15 seconds to read all BMC SEL records.
SEL Entry
Number
Use the +/- keys to traverse the BMC Event Log.
Clear BMC System
Event Log
Use this option to clear all events in the BMC System Event Log.
 Set LAN
Configuration
This is the input for the SET LAN Configuration command. See IPMI 1.5
Specification Table 19.1 for details.
NOTE: Each question in this sub-menu may take a considerable amount of time
to complete.
 IP Address Use this sub-menu for IP Address configuration.
Table 6-10. AHCI Configuration Submenu (Continued)
Menu Option Description