User's Manual

SBI-7226T-T2 Blade Module User’s Manual
4-8
Clearing CMOS
1. First power down the blade and remove it from the enclosure.
2. Remove the blade cover to access the mainboard (see Section : Removing/
Replacing the Blade Cover on page 3-2 for further details). Short the CMOS pads
with a metal object such as a small screwdriver.
3. Replace the cover, install the blade back into the enclosure and power it on.
4-3 Blade Unit Components
Figure 4-5. Exploded View of SBI-7226T-T2 Blade Module
1
2
2
3
4
3
5
4
3
2
2