User's Manual

4-1
Chapter 4
Blade Module Features
Figure 4-1. SBI-7226T-T2 Blade Unit Front View
This chapter describes the SBI-7226T-T2 blade unit. Installation and maintenance
should be performed by experienced technicians only.
See Figure 4-1 for a front view of the blade unit and Table 4-1 for its features.
Table 4-1. SBI-7226T-T2 Blade Unit Features
Feature Description
Processors
Supports Dual 1366-pin LGA Socket processors for up to two Intel 64-bit
quad-core Xeon series processors.
Memory
Supports up to 64 GB of ECC Registered DDR3-1333/1066/800 SDRAM
DIMMs or 16 GB of ECC Unbuffered DDR3-1333/1066/800 SDRAM
DIMMs in six DIMM slots
Storage One or two 2.5" hot-plug SATA hard disk drives per node
Ports KVM port (1)
Features
Onboard Matrox G200eW Graphics chip with 16 MB of SDRAM, IPMI 2.0,
Plug and Play, APM 1.2, DMI 2.3, PCI 2.2, ACPI 1.0/2.0, SMBIOS 2.3,
Real Time Clock
Power Consumption
Base Power Draw (~35W) / Power per CPU (60W/80W/95W) / Power per
DIMM (typically ~7W)