MSDS

SECTION VII - PRECAUTIONS FOR SAFE HANDLING AND USE
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: AVOID BREATHING VAPORS.
Ventilate areas. Remove all sources of ignition. Clean up area with absorbent material and place in closed
containers for disposal.
WASTE DISPOSAL METHOD: Dispose of in accordance with Local, State and Federal Regulations. Before
attempting clean up, refer to other sections of the MSDS for hazard caution information.
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORAGE: Store in cool, dry, well-ventilated areas. Do not
store above 120°F. Do not puncture or incinerate (burn) cans. Do not stick pin, nail or any other sharp object into
opening on top of can. Do not spray in eyes. Do not take internally. See product label for additional information.
OTHER PRECAUTIONS
Small pressurized containers of flammable products may be stored in areas suitable for ordinary combustibles with
respect to construction, drainage, control of ignition sources, and ventilation except that they should not be stored in
basements.
SECTION VIII - Control Measures
RESPIRATORY PROTECTION: None under normal use. Avoid breathing vapors. In restricted areas, use
approved chemical/mechanical filters designed to remove a combination of particles and vapor. In confined areas,
use approved air line type respirator or hood. Self contained breathing apparatus is required for vapor
concentrations above PEL/TLV limits.
VENTILATION: Sufficient to prevent inhalation of solvent vapors. General dilution and/or local exhaust ventilation
in volume or pattern to keep PEL/TLV of most hazardous ingredient below acceptable limit and LEL below stated
limit.
PROTECTIVE GLOVES: None under normal use. Solvent resist required for prolonged or repeated contact.
OTHER PROTECTIVE CLOTHING OR EQUIPMENT: None under normal use; however, use of safety glasses with
splash guards or full face shield is recommended.
WORK/HYGENIC PRACTICES: Eye wash and safety showers in the work place are recommended.
SECTION IX - DISCLAIMER
This information contained herein is based on data considered accurate. However, no warranty is expressed or
implied regarding the accuracy of the data or the results to be obtained from the use thereof. Because the
information contained herein may be applied under conditions beyond our control, we assume no responsibility for
its use.
HMIS CODES:
FIRE: 3
HEALTH: 2
REACTANCE: 0
OTHER: 0
SLAWH960601.1