MSDS

Page 3 of 7
Flammable/Explosive limits-lower %: .6 (vol %)
Flammable/Explosive limits-upper %: 5.5 (vol %)
Extinguishing media: In case of fire: Use Carbon dioxide (CO2), Dry
chemical, or Foam for extinction.
Special fire fighting procedures: Water spray may be ineffective. Water should be used
to cool closed containers to prevent pressure build-up
and possible autoignition or explosion when exposed to
extreme heat.
Unusual fire or explosion hazards: Closed containers may rupture (due to build up of
pressure) when exposed to extreme heat.
Hazardous combustion products: Oxides of carbon.
Sensitivity to mechanical impact: Not available
Sensitivity to static discharge: Not available
6. ACCIDENTAL RELEASE MEASURES
Environmental precautions: Harmful to aquatic organisms.
Clean-up methods: Remove all ignition sources. Ventilate area. Soak up
with inert absorbent.
7. HANDLING AND STORAGE
Handling: Use only with adequate ventilation. Avoid contact with
eyes, skin and clothing. Do not breathe mist or vapors.
Storage: Store in a well ventilated place. Keep cool.
Heat from sunlight, radiators, stoves, hot water, and
other heat sources could cause containers to burst.
Incompatible products: Reacts with strong oxidants.
Section 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
Engineering controls: Local exhaust ventilation is recommended when general
ventilation is not sufficient to control airborne
contamination below occupational exposure limits.