Instruction Manual

ASSEMBLE HANDLE

1. Place the main handle of bottom part (1) into the

base frame (2), fixed by Flange bolt (3) & Flange

Nut(4).

2. Insert the main handle of top part (5) into bottom

part (1) tube, fixed by Flange bolt (6) and nut (4).

ASSEMBLE MAIN FRAME

1.Take the bottom wire deck(2), face the flat wire upside

and position the dumping handle groove side to main

handle. Put the bottom wire deck(2) on to the base

frame (1) , fasten by bolt (3) and washer (4),

locked by the pin (5).

Flange bolt M8*70 x4

Flange Nut M8 x6

Main handle top x1

Flange bolt M8X40 x2

Main handle bottom x1

Bolt x2

Washer 10 x4

Pin 2.5*45 x2

Bottom x1

Motor driver x1