SDS

SAFETY DATA SHEET
Date Prepared : 10/24/2012
MSDS No :
Date-Revised : 04/17/2017
Revision No : 5
EXPOSURE GUIDELINES
OSHA HAZARDOUS COMPONENTS (29 CFR1910.1200)
EXPOSURE LIMITS
Chemical Name Type ppm mg/m
3
Ethyl Acetate
OSHA PEL TWA 400 1400
ACGIH TLV TWA 400 1440
2-Butanone
OSHA PEL TWA 200 590
ACGIH TLV
TWA 200
STEL 300
Hexane
OSHA PEL TWA 500 1800
ACGIH TLV TWA 50 180
Cyclohexane
OSHA PEL TWA 300 1050
ACGIH TLV TWA 100
PERSONAL PROTECTIVE EQUIPMENT
EYES AND FACE: Tightly sealed goggles.
SKIN: The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing
tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection
of glove material should take into consideration the penetration times, rates of diffusion and the degradation.
RESPIRATORY: In case of brief exposure or low pollution use respiratory filter device. In case of longer exposure use
respiratory protective device that is independent of circulating air.
PROTECTIVE CLOTHING: Wear protective clothing. Launder contaminated clothing before reuse.
WORK HYGIENIC PRACTICES: Wash hands before breaks and at the end of work.
9. PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL STATE: Liquid
ODOR: Characteristic
ODOR THRESHOLD: No data available
COLOR: Yellowish
pH: No data available
PERCENT VOLATILE: No data available
FLASHPOINT AND METHOD: -9°C (16°F)
FLAMMABLE LIMITS: 1.3% to 11.50%
AUTOIGNITION TEMPERATURE: Product is not selfigniting.
VAPOR PRESSURE: 105 mmHg at 20°C (68°F)
VAPOR DENSITY: Heavier than air
BOILING POINT: 69°C (156°F)
Page 4 of 8
Contact Cement