SDS

SAFETY DATA SHEET
Date Prepared : 10/24/2012
MSDS No :
Date-Revised : 04/17/2017
Revision No : 5
Hexane < 5 - 10 110-54-3
Cyclohexane < 2.5 - 10 110-82-7
4. FIRST AID MEASURES
EYES: Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
SKIN: Immediately wash with water and soap and rinse thoroughly.
INGESTION: If symptoms persist consult doctor. Do not induce vomiting.
INHALATION: In case of unconsciousness place patient stably in side position for transportation.
5. FIRE FIGHTING MEASURES
GENERAL HAZARD: During heating or in case of fire poisonous gases are produced.
EXTINGUISHING MEDIA: CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
FIRE FIGHTING EQUIPMENT: Wear an approved mouth respiratory protective device.
6. ACCIDENTAL RELEASE MEASURES
SMALL SPILL: Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
ENVIRONMENTAL PRECAUTIONS
WATER SPILL: Do not allow to enter sewers/ surface or ground water.
LAND SPILL: Do not allow to enter sewers/ surface or ground water.
AIR SPILL: Do not allow to enter sewers/ surface or ground water.
GENERAL PROCEDURES: Ensure adequate ventilation. Dispose contaminated material as waste according to section 13.
7. HANDLING AND STORAGE
GENERAL PROCEDURES: Ensure good ventilation/exhaustion at the workplace. Open and handle receptacle with care. Prevent
formation of aerosols.
HANDLING: Keep ignition sources away - Do not smoke. Protect against electrostatic charges. Keep respiratory protective device
available.
STORAGE: Keep receptacle tightly sealed. Store in cool, dry conditions in well sealed receptacles.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Page 3 of 8
Contact Cement