SDS

SAFETY DATA SHEET
Date Prepared : 02/27/2017
MSDS No :
Date-Revised : 08/10/2017
Revision No : 2
4. FIRST AID MEASURES
EYES: Immediately flush eyes with large quantities of water for several minutes, while holding eyelids apart. Remove contact
lenses if easy to do so. Continue rinsing. Get medical attention if irritation or bonding occurs.
SKIN: Flush skin with water for several minutes. If bonded, immerse bonded areas in warm, soapy water for several minutes. Peel
or roll skin or bonded material apart. Get medical attention if irritation occurs. Remove and launder clothing before re-use.
INGESTION: Flush lips with warm water to release lips if bonded. Ingestion is unlikely, though the product may stick in the mouth.
Over a period 1-2 days, the product will be loosened by saliva. Avoid swallowing the product. Get medical attention if symptoms
occur.
INHALATION: Remove victim to fresh air. Get medical attention if symptoms of exposure persist.
SIGNS AND SYMPTOMS OF OVEREXPOSURE
EYES: Bonds eyelids immediately.
SKIN: Bonds skin immediately.
SKIN ABSORPTION: Large quantities may react with skin and cause skin burns.
INGESTION: May be harmful if swallowed.
ADDITIONAL INFORMATION: Immediate medical attention should not be required.
5. FIRE FIGHTING MEASURES
GENERAL HAZARD: Combustible liquid and vapor. Contact with water will cause the product to polymerize and become solid.
Combustion will produce oxides of carbon and nitrogen, and other toxic or irritating compounds.
EXTINGUISHING MEDIA: Use dry chemical extinguisher or flush with large amounts of water.
FIRE FIGHTING PROCEDURES: Evacuate area and fight fire from a safe distance.
FIRE FIGHTING EQUIPMENT: Wear an approved, positive pressure, self-contained breathing apparatus and full protective
clothing. Cool fire exposed containers with water.
HAZARDOUS DECOMPOSITION PRODUCTS: Combustible by-products of carbon monoxide/dioxide.
6. ACCIDENTAL RELEASE MEASURES
ENVIRONMENTAL PRECAUTIONS
WATER SPILL: Avoid releases to the environment. Report spills and releases as required to appropriate authorities.
LAND SPILL: Avoid releases to the environment. Report spills and releases as required to appropriate authorities.
AIR SPILL: Avoid releases to the environment. Report spills and releases as required to appropriate authorities.
GENERAL PROCEDURES: Evacuate spill area and keep unprotected personnel away. Remove all ignition sources such as open
flames, etc. Avoid contact with eyes, skin or clothing. Wear appropriate protective clothing to prevent eye and skin contact
including impervious gloves, safety goggles, and respirator if needed. Avoid breathing mists or vapors. Ventilate area.
RELEASE NOTES: Collect material with absorbent rags (not paper towels) or wash the material down with water to solidify and
scrape off surface. Rinse spill area with water.
7. HANDLING AND STORAGE
GENERAL PROCEDURES: Avoid breathing mists or vapors. Use with adequate ventilation.
HANDLING: Avoid contact with the eyes, skin, and clothing. Wear appropriate protective clothing as described in section 8. Wash
Page 2 of 6
Light Curing Adhesive