Instruction Manual

To reduce the risk of injury to your
eyes never operate your power tool
unless wearing goggles or, or
properly fitted protective glasses with
adequate top and side protection complying
with ANSI Z87 "+" (or your applicable
national standard). If there is a risk of injury
to your face, SuperbrandTools
recommends that you also wear a face
shield or face screen over your goggles or
protective glasses.
Wear an approved safety hard hat to
reduce the risk of injury to your head. Wear
sound barriers to help protect your hearing.
Continual and regular users should have
their hearing checked regularly.
Be particularly alert and cautious when
wearing hearing protection because your
ability to hear warnings (shouts, alarms,
etc.) is restricted.
THE SUPERSAW
For illustrations and definitions of chain saw
parts see page 11.
WARNING: Never modify this chain
saw in any way. Only attachments
supplied by SuperBrandTools or expressly
approved by SuperBrandTools for use
with the specific SuperBrandTools model
are authorized. Although certain
unauthorized attachments are useable with
SuperBrandTools chain saws, their use
may, in fact, be extremely dangerous.
WARNING: Never operate your
chain saw if it is damaged,
improperly adjusted or maintained, or not
completely and securely assembled.
If this chain saw is subjected to unusually
high loads for which it was not designed (e.g.
heavy impact or a fall), always check that it is
in good condition before continuing work.
Check in particular that the controls and
safety devices are working properly. Do not
continue operating this machine if it is
damaged. In case of doubt, have it checked
by an expert.
THE USE OF THE SUPERSAW
Transporting the SuperSaw
WARNING: Always switch off the motor,
move front hand guard before putting the
chain saw down.
Accidental acceleration of the motor can
cause the saw chain to rotate.
By hand: When transporting your chain
saw by hand, the battery must be removed
and the chain saw must be in the proper
position.
WARNING: Do not carry the chain saw by
the blade.
Before Operation
Take off the chain guard and inspect the
chain saw for proper condition and
operation.
WARNING: Proper tension of the
saw chain is extremely important. In
order to avoid improper setting, make sure
the chain is tightened securely reference
the manual and instructional video for
proper procedure. Seek expert assistance if
you do not have experience operating a
chainsaw.
Always make sure the hexagonal nut(s) for
the sprocket cover is(are) tightened
securely after tensioning the saw chain in
order to secure the bar.
Never start the chain saw with the sprocket
cover loose. Check saw chain tension once
more after having tightened the nut(s) and
SUPERSAW
TM