Brochure

Leak Lock and Leak Lock GOLD with Teflon
A resin based soft setting brushable paste pipe joint compound
resistant to all refrigerants, oils, water and most chemicals, liquids and gases.
• Use with pressures to 10,000 PSI to full vacuums.
• Temperature range -200°F (-93°C) to 400°F (204°C).
• It never hardens and it never becomes brittle.
• Ideal for joining all metals, plastics and other materials.
• Will stick to all clean surfaces.
• Prevent vibration from loosening nuts, bolts, plugs and fittings.
• Non Toxic
• GUARANTEES A PERFECT SEAL… UNDER ALL CONDITIONS
PART NO. SIZE PACKAGING
LEAK LOCK
HS10001 1-1/3 oz TUBE 12/CASE
HS10004 4 oz Brush Top Plastic Jar 12/CASE
HS10016 16 oz Brush Top Plastic Jar 12/CASE
HS10128 1 Gallon Can 1
LEAK LOCK GOLD
HS11001 1-1/3 oz TUBE 12/CASE
HS11004 4 oz Brush Top Plastic Jar 12/CASE
HS11016 16 oz Brush Top Plastic Jar 12/CASE
HS11128 1 Gallon Can 1
Red Epoxy
When you need a sealant you can count on.
High Performance, Heat Cured, Two Part, Epoxy Kit
• Exhibits a Color Change When Cured (Turns Gold)
• May Be Cured With a Hot Air Gun or Open Flame in Minutes
• -100°F (-73°C) to 300°F (149°C) • Equipment is Serviceable Immediately
• Working Pressure in Excess of 3000 PSI • Use on All Metals and Rigid Plastics
• Tensile Strength: 6000 PSI • HVAC & Refrigeration
• Works on Vertical Surfaces • Plumbing & Appliances
• Pressure Tested to 3000 psi • Automotive & Marine
• Simple, Quick Mixing & Application • Petrochemical, Manufacturing
• Oil, Gas, Fuel & Solvent Resistant • Industrial, Commercial, Institutional
• No Rush, No Wait, You Control Curing Time
PART NO. SIZE PACKAGING
HS12001 Kit Including 2 1/2 oz Tubes 12/CASE
Solderlene
High Quality, Paste Type, Non-Acid Soldering Flux.
• Industrial strength wetting agents to promote solder flow
• For use with low and mid-temp. soft solders, both lead and lead-free
• Effective on all metals except aluminum and magnesium.
• Brush Top Plastic Jars
PART NO. SIZE PACKAGING
HS30004 4 oz 12/CASE
HS30016 16 oz 12/CASE
Thawzone
(New Formula)
The original liquid dehydrant, frees your frozen system in minutes.
It seeks out moisture and chemically bonds to it.
• Enhanced moisture control in even the most advanced systems.
• Aids with oil return in low temperature systems.
• Compatible with all refrigerants and refrigeration lubricants.
• Helps prevent the formation of acid. • Safer
• No Methanol • Biodegradable, non-polluting
• Environmentaly Sound • Non-Poisonous
Add 1/8 fluid ounce ( 3.75 ml ) of THAWZONE directly to the re-
frigerant of any system for ever y 1 lb. Of refrigerant in the system.
*HIGHSIDE SYSTEM INJECTOR (part no. HSINJ001) IS RECOMMENDED FOR IN-
TRODUCING THAWZONE INTO AN OPERATING SYSTEM.
PART NO. BOTTLE SIZE PACKGING
HS17001 1 oz 24/CASE
HS17004 4 oz 12/CASE
* MSDS Sheets are available for all chemicals, visit www.supco.com or call SUPCO at [phone].