SUP’AIR - VLD 34 rue Adrastée Parc Altaïs 74650 Annecy - Chavanod FRANCE 45°54.024’N / 06°04.
Harness User’s manual Thank you for choosing the EVEREST3 We are glad to be able to share our common paragliding passion with you. SUP’AIR has been designing, producing and selling free flying equipment since 1984. By choosing a SUP’AIR product you benefit from almost thirty years of expertise, innovation and listening. Our mission statement: research and develop to constantly enhance our product line. We hope you will find this user’s manual comprehensive, explicit and hopefully enjoyable as well.
Harness User’s manual Introduction Technical specifications. Size choice Components list Equipment overview Pulling on the harness Wing/harness connection Speedbar setup Flight behavior Flight phases Pre-Flight check Takeoff Speed-bar use Landing List of contents 4 5 6 7 8 9 10 11 12 12 12 12 13 13 Towing Mandatory thorough checkup Maintenance Harness cleaning and maintenance Storage and transport Product lifespan Repairs Spare parts.
Harness User’s manual Introduction Welcome to the paragliding world according to SUPAIR a world of shared passion. The EVEREST3 was designed for pilots coming out of school or in progression. It brings comfort and peace of mind to pilots experiencing their first XC ( Cross-Country ) flights to discover new horizons ! The well though out design and materials choices were guided by light and compact objective keeping a highl quality level.
Harness User’s manual Technical specifications A Backrest height. B Backrest tilt adjustments. C Seat depth. D Seat width E Hooking point height. F Length between the hooking points.
Harness User’s manual Size choice Choosing the right harness size is important. You will find below a height/weight chart to help you with your size choice. With its hammock architecture and reclined flying posture, we advise you to try out the harness during a hang-test first at one of our retailers location to choose the correct size. For a complete list of our retailers list click here : www.supair.
Harness User’s manual 1 Harness 2 Edelrid Ease screwgate carabiners 3 independent storage pocket 4 2 O-rings Nomenclature Options 1 Light double stage accelerator/speed-bar (réf.
Harness User’s manual Harness overview 1 Paragliding main hooking points. 2 Speed-bar grommets. 3 Chest strap 4 Leg strap.
Harness User’s manual Carabiners assembly with «O» ring Pulling on the harness 1. Thread 2.
Harness User’s manual Wing/harness connection >> Wing/harness connection Without twisting the risers, connect them to the harness attachment loops using the selflocking carabiners. Check for the risers to be properly positioned and untwisted. The «A» risers must be located at the front and facing the flight direction (see diagram). Lastly, check for the main self-locking carabiners to be fully closed and locked in place.
Harness User’s manual Speed-bar assembly >> Compatible accelerator/speed-bar LIGHT 2B speed-bar/accelerator. Ref..: ACCELSOUPLELIGHT >> Speed-bar assembly Regarding either side of the harness: 1. Push the speed-bar line through the grommet located at the front of the seat. 1 2. Push the speed-bar line through the grommet located on the lateral skirt of the harness. 2 3. Finally, attach a cimped hook to the cord before connecting it to the glider’s speed-bar/accelerator. 4.
Harness User’s manual Flight behavior Easy to ground handle with, once in flight, piloting with this very agile harness becomes precise. The feedback from the wing is translated through the leg suports which inversely to a wooden seat plate, transmit the left and right motions independently.
Harness User’s manual Flight phases Speedbar use. We recommend using the speed-bar cautiously due to the increased risk of a partial or full frontal collapses. Use the speed-bar/accelerator ( transitions ) only when far away from the ridge and in calm weather conditions as the wing becomes more sensitive to turbulence when accelerated.
Harness User’s manual Care Harness cleaning and maintenance. It is a good idea to clean your harness from time to time. We recommend using a brush and soft solvents only ( soap or mild cleaning agents ). Rinse thoroughly. Never use aggressive chemicals such as strong solvents which could be harmful to the fabric, webbings, stitching and weaken the overall integrity of the harness. The zippers should be lubricated from time to time using a silicon spray.
Harness User’s manual Care Repairs In spite of using the highest quality products used for manufacturing, it is possible for your harness to deteriorate through general use. If showing any sign of wear and tear it should be sent for inspection and/or repairs at a professional certified facility. SUP’AIR offers an extended warranty period reaching beyond the product standard protection plan against manufacturing defects. Contact us either by telephone or by E-mail sav@supair.com to receive a quotation.
Harness User’s manual Warranty SUP’AIR takes the greatest care in its products design and manufacturing and hence offers a five (5) year limited warranty from the date of purchase against manufacturing defects or flaws occurring during normal use. Any damage or degradation resulting from incorrect or abusive use, abnormal exposure to aggressive factors, including, but not limited to; high temperature, intense sun exposure, high humidity, excessive abrasion, etc, will invalidate this warranty.
Harness User’s manual Service Book. This page will help you keep record of your EVEREST3 scheduled maintenance.
SUPAIR-VLD Parc Altaïs 34 rue Adrastée 74650 Chavanod, Annecy FRANCE info@supair.com +33(0)4 50 45 75 29 45°54.024’N / 06°04.
