User Manual

4
This appliance is intended to be used in
household and similar applications such as:
– staff kitchen areas in shops, offices and
other working environments;
– farm houses;
– by clients in hotels, motels and other
residential type environments;
– bed and breakfast type environments.
WARNING
This product was not designed for any uses
other than those specified in this manual.
Place the
Sunway Multifunction Cooking Machi
ne on a clean, solid, levelled and non-heatable
If you don’t need to use your Sunway Multifunc
tion Cooking Machine for a long time period, ple
ase pull its plug out of the socket as you would
do with the majority of electrical appliances.
Make sure that the ventilation opening at the
rear of the appliance is always free of fat spla
shes, food leftovers or similar waste and that it
hasn’t been covered. Otherwise damage may
occur to the appliance.
KEEP THESE INSTRUCTIONS FOR
FUTURE REFERENCE
Switch off the appliance and disconnect from
supply before changing accessories or appro
aching parts that move in use.
Always disconnect the appliance from the supply
if it is left unattended and before assembling,
disassembling or cleaning.
Ensure that the appliance is switched off before
removing accessories from the stand.
If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
Be careful if hot liquid is poured into blender as it
can be ejected out of the appliance due to a sudden
steaming.
The appliance inlet must be dried before the
appliance is used again.
A warning to avoid spillage on the connector.
FCC WARNING
Warning: Changes or modifications to this unit not
expressly approved by the party responsible for
compliance could void the user’s authority to operate
the equipment.
STATEMENT
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation. If this equipment
does cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV
technician for help.
Note
The USB port on the bottom is only used to upgrade
the software.