User Manual

06
HOW TO USE THE SUNWAY
MULTIFUNCTION COOKING
MACHINE
WARNING
The Sunway Multifunction Cooking Machine co
mes with two safety sensors on the lid and base
of the Mixing Cup.For optimum use of the ma
chine, the Mixing Cup must be duly placed in the
central unit. Otherwise the machine will detect
an error and won’t work.
Make sure that the Mixing Cup, blades and all
the accessories are totally clean before using the
machine.
1 / Place the Mixing Cup as indicated on chapter 5.
2 / Select the wanted cooking time.
During the cooking process,
the Sunway Multi
function Cooking Machine will count down the
programmed time and a sound signal will indica
te that the time is complete.
3 / Select the desired cooking temperature.
4 / Select the desired speed.
When mixing the dough, never use a low speed
from 1 to 4 at the start. Always mix the dough at
higher speeds for a few seconds and then put at
speed 2-3 for 3 or 4 minutes. Never use the Mixer
when kneading the dough. If the blades are lo
cked or the apparatus starts vibrating too muc
h,
turn it off immediately to avoid any damage.
The Turbo and the high speeds (7-10) are ap
propriate for short operations meaning that you
must not use these functions for periods excee
ding 30 seconds at once.
Put the machine on a flat table, plug it in, turn
the “On/Off switch” ON of the machine back, at
this time the red light indicator, wait for a while,
the machine into the “DIY” intrerface.
After entering the default is "DIY" interface that
can manually control the machine, including
scales function.(see Figure 6)
Figure 6
/ DIY function
16